High Temperature Convection Oven

HFO-144S

Purpose

Make-to-order

Feature

Used for various purposes, including drying of glassware, thermal deformation and curing experiments of samples, and moisture removal from samples.
Leakage and overcurrent protection through grounding wiring and NFB installation.
PID Auto-tuning controller
Precise temperature control is achievable by finding the appropriate PID values for the surrounding environment. Digital LED or LCD(Option).
By setting the required time at a constant temperature, optimal drying conditions can be achieved.
The use of a sealing door ensures excellent airtightness, while the smooth opening and closing of the door prevents vibration of samples inside the chamber.
In addition to automatic operation of the safety valve in case of overpressure, an Over Temperature Limiter is also integrated for temperature cut-off.

Specification

Model		AP-HFO-144S
Chamber Volume(ℓ)		47L
Size	Internal	600(W) X 600(D) X 130(H) mm Usable space 400(W) X 500(D) X 30~100(H)mm
Size	External	1550(W) X 1000(D) X 1550(H) mm
Temperature	Range	Amb ~ 320°C
Temperature	Controller	Digital PID controller
Sensor		K-type sensor
Gasket Type		High Performance Silicon rubber type
Instrumentation System		Grounding: Grounding according to KS standards
		Wiring: Wiring according to KS wiring standards
		All output terminals are grounded and equipped with an ELB
Heater		5KW(Chamber), External Heater 1.86KW(25L/min: air)
Power consumption		380V 3P, 15 AMP 1. Oven: 5KW 2. External Heater: 1.86KW
Safety System		Over temp limit with interlock
Material		Inner Chamber: SUS 304
Material		Out Body: SS40 t