Multi-Room Vacuum Oven

VO-196S

Purpose

Feature

Suitable for use in production environments with limited space.
Features the ability to control the temperature in each room individually.
These products are used by electronics, electrical components, and chemical companies.
The product's door is made of aluminum instead of glass.
Excellent stability with an O-ring type design, which reduces the load on the O-ring, ensuring long-term use. It provides a great sealing effect and is highly efficient in maintenance.

Specification

Model		VO-196S
Environment Condition		Temp. 5℃~ 35℃ Maximum Relative Humidity 85%RH Altitude up to 2,000m
Chamber Volume (ℓ)		196L
Heater Power (kW)		6.5kW
Temperature	Range	Abm. 45℃~250℃(Recommended up to 220°C)
	Control	0.1℃
	Accuracy	±2℃ at 100℃
	Controller	Digital PID control system
	Sensor	K-type
	Stability	±1.0℃
	Heat up Time	200℃ within 100 minutes (only chamber empty status)
Vacuum	Range	0~760 Torr analog type
Vacuum	Degree	About 0.1 Torr
Material	Interior	Stainless Steel
	Exterior	Steel, 1.2t, Double Painted & Baked
	Heater	SUS Pipe Heater
	Insulation	Mineral Wool (100mm)
	Door packing	Molded Heat Resistant Silicone Rubber
	Inner glass	Tempered Safety Glass, 15mm
Heating Method		SUS Sheath Heater 1kW x 3 EA / 500W x 7EA
Shelf		3 EA
Dimension	Internal	402 405 1606
Dimension	External	600 710 1906
Power		220V / 3P/ 60Hz 3.5kW
Weight (kg)		about 80kg

Product Advantages

The product is equipped with a viewing window, allowing you to check the samples frequently.
The center of gravity is positioned towards the front, so the wheels are placed at the front. => making it easier to move.
Its compact structure allows multiple units to be used in a small space.
When there is limited space, the product can be very useful and efficiently utilized in narrow areas.

How to Use

The product is divided into three sections inside.
Place the samples in each of the three sections, set the temperature, and turn on the pump to create a vacuum.
Once the vacuum is applied, impurities and moisture in the samples are expelled, and the product is used in the final stage of processes for electrical and electronic products.
Since it is a multi-room chamber, it allows for temperature control in three separate areas.
When the timer is used, the heater will turn off once the timer reaches zero.
When not in use, the heater will remain on unless manually turned off.
After the work is complete, turn off the pump and open the vent valve to release the vacuum and open the door.
To fill the nipple with gas, open the vent valve and then add the gas.